Shopping Bag

×

eddi

Buy now

eddi

eddi

£395.00 inc.Vat if applicable

Microgeneration energy diverter free water and space heating using excess energy from your PV or wind turbine

eddi

Microgeneration energy diverter free water and space heating using excess energy from your PV or wind turbine

Buy now

About eddi

eddi is an energy management system for use with grid-tied PV or wind turbine systems. Excess energy from the micro-generation system is used to heat water or rooms rather than exporting it to the grid.

How eddi works

A grid current sensor (supplied) simply clips around the incoming supply cable. This sensor is used to monitor excess power and eddi automatically adjusts the voltage to the heater load, thereby consuming the surplus power. A self-powered wireless sensor is available separately. An internal expansion interface provides a means to add and expansion module to enable various functions such as auto switching from day-time and night-time supply, heat pump interfacing for legionella control and temperature sensing. eddi utilises myenergi’s proprietary VariSineTM technology to ensure compliance with worldwide power grid standards.

Features

  • 3.68KW / 16A max. heater load
  • Supports two heaters (sequentially)
  • Integral bypass switch
  • VariSineTM PWM technology
  • Fan-less cooling
  • Built-in programmable boost timers
  • Energy savings data logging
  • Graphical back-lit LCD screen for ease of use
  • Overload and short-circuit protection
  • Automatic Daylight Saving Time adjustment
  • Works with all myenergi devices
  • Expansion module option
  • Wall mounting bracket for ease of installation
  • Fully EMC and safety compliant (CE)
  • 3-year warranty
  • Works alongside battery storage systems
  • Optional remote control access via our hub device and app (optional extra)

Specifications

Specification Details
Rated Input Power 3.68kW
Rated Supply Voltage 230V AC Single Phase (+/- 10%)
Supply Frequency 50Hz / 60Hz
Rated Current 16A
Standby Power Consumption 3W
Generator Size Supported No limit (subject to 100A per-phase grid supply)
Heater Load Size 100W min. 3.68kW max.
Economy Tariff Sense Input 230V AC sensing (2.5kV isolated)
Wireless Interface 868 MHz (proprietary protocol) for wireless sensor and remote monitoring options
Grid Current Sensor 65A max. primary current, 16mm max. cable diameter
Supply Cable Entry Rear, bottom, or side option
Specification Details
Dimensions 220 x 205 x 87mm (excluding wall bracket)
Weight 4.3kg (excluding wall bracket)
Protection Degree IP20
Enclosure Material Painted Zintec steel
Operating Temperature -20°C to +40°C
Mounting Method Wall mounting bracket

Need an installer?

Find an installer

Downloads

eddi Manual Download
eddi Datasheet Download

eddi

Buy now