zappi v2Configuration Settings

  1. Configuration Settings
  2. Time & Date
  3. Display & Sound
  4. RGB LED

1. Configuration Settings

All settings are described in the Main Menu section, however, the more commonly altered settings are described in more detail below.

2. Time & Date

The date and time are used for the Boost Timer and the savings calculations and therefore should be set correctly. In the event of a power-cut, and providing you have a hub and have set the zappi to “update from cloud”, the zappi will update the time and date automatically.

Even if a hub is not connected zappi will keep track of the date / time for approx. 48 hours.

Time is always in 24-hour format, but the date format can be changed.

zappi will automatically adjust the clock for Daylight Savings Time (DST) as long as Auto DST is enabled, and the correct time zone is selected.

The following Time and Date settings are recommended:

  • Timezone – set to correct timezone
  • Auto DSTOn
  • Update from Cloud On

3. Display & Sound

The Generation Icon on the zappi display can be changed to match your local system.

Select between “Sun” (PV) and “Wind” on the Icons… submenu to change the icon

If do not have any local generation then the icon can be turned off by changing the Monitoring… setting

4. RGB LED

zappi has a coloured LED light on the front which changes colour and flashes to provide a visible indication of the charge state. The brightness of the LED and the colours can be adjusted from the RGB LED menu.